彩亿彩票 NCAT Thermo Fisher (asphalt combustion furnace combustion method of asphalt content tester) test accuracy of up to 0.11% of asphalt content. This method also can provide clean aggregate for grading analysis.
彩亿彩票 1, save time
彩亿彩票 The combustion method and solvent extraction were compared to save a lot of time, 1200~1800 g sample only 30~45 minutes, can accommodate up to 5000 grams of weight of sample.
Automatic monitoring of sample weight - built in the combustion process balance, balance accuracy is less than 0.1 grams.
24 - hour timer to control the combustion furnace in the work day begins to warm up before the test.
Automatic operation - the system, the staff can do other work in the equipment during operation.
彩亿彩票 - easy operation: only need to input the sample weight and calibration coefficient, load the sample, press the start button, hear a beep press stop button to complete the test.
2, economic benefits
The only standard of 20 amps, and similar products need to provide 40~50 amps.
The method does not require solvent recovery or combustion.
The high strength refractory material embedded electric heating plate can protect the electric wire to prolong its service life.
彩亿彩票 3, non-toxic and safe
- avoid the use of toxic solvents.
High temperature filter - unique patent system, using ceramic filters and high temperature afterburner can reduce exhaust emissions, and fixed on the furnace top, no need to install, the 14 "x 14" x 14 "combustion chamber has been fully applied.
彩亿彩票 - once opened the door, the door safety built-in lock automatically cut off the power supply of the heating unit.
The software will lock the door, open the door to prevent the heating process.
彩亿彩票 - 180 degrees to open the door to take the sample. The door hinge can prevent the open doors closing on their own.
彩亿彩票 <strong> technical specifications</strong>